Vinyl Flooring FAQ

You need to fully understand the products you are working with in order to compare and only once you understand both products are you able to make that choice.

Even though there are no specifications for the SA climate at this stage, the European specifications will be used and these will be on the same level as the laminate specifications.

They are more durable in moist environments but even this very forgiving flooring has its boundaries and precautions need to be taken

Vinyl exposed to heat/temperature changes could be problematic if care is not taken; the dimensional Stability is a good indicator re the performance of a LVT/click vinyl product. The EN 434 European test will indicate the percentage movement that the vinyl will experience when exposed to heat. The minimum requirement is <0.25%.If installed correctly and the surroundings taken into consideration, you should have no problems with swelling, shrinkage or otherwise.

Different application areas depend on the thickness of the wear layer: It is graded, the following can be followed: 0.1mm – 0.3mm – Suitable for home, office, exhibition stands, kinder garden school classrooms etc. 0.3mm – 0.5mm – Suitable for cinema, school classrooms, hospital main reception areas, super markets, hotels etc. 0.5mm – 0.7mm – Suitable for airport terminals and main access passages, lift lobbies, subways and train platforms. The heavier the potential traffic usage the greater the wear layer required. Check for high-quality manufacturing processes using 100% vinyl, as some imports include “fillers” which could contain contaminants or lesser quality materials.

Installers not following correct installation procedures and not taking the environment the floor will be installed into consideration and also not handing over maintenance instructions.

Just the same, if the installer does not follow correct procedures, the floor will fail.

Some specifiers are hesitant to recommend Vinyl due to the installers and retailers not understanding the product and it’s capabilities but correct training should change this concept, with training being essential to anyone installing or selling vinyl.

Are customers happy to switch if they go in looking for laminates or are they locked into what they know? Most people are open to change and the customers are happy to go with what the sales people recommend.

Mechanical and Physical recycling methods are adopted worldwide. Some manufacturers recycle their own products 100%. They don’t recycle products of others, because they are unsure of what they contain. This process is not adopted in SA at this stage however vinyl contains low levels of Volatile organic compounds, so therefor is healthier than recycled vinyl. It is not made of wood, so it is less harmful to the environment, and it can be transformed and used for other plastic products. Quality laminates can be used as firewood; however this said, laminate flooring should not be burnt around people due to the resins.

As with Laminates, some manufacturers are very responsible whilst others just chase sales at any cost. This makes it vital for consumers to investigate the manufacturer/distributor when making a selection.

Depending on the quality of the click system itself but Interlocking vinyl can be up- lifted and re-installed; unfortunately glue down vinyl cannot be up-lifted.

Yes, one can but only under controlled conditions where proper expansion/separation details are addressed between the floors. It is not recommended to lay LVT directly against laminates as the rate of expansion/contraction would not be the same with temperature fluctuations and locking mechanisms will differ. Levels would need to be rectified or a reducer profile used to compensate for the difference.

All ranges will differ depending on the type of wear layer used and the embossing incorporated into it, this is generally no different to other floor surfaces but all vinyl’s have a slip resistance and can be checked against the EN standard 13893:2002/EN14041